• What to Do if Your Home Is Exposed to Biological Contaminants

    When flooding occurs in your area, it is important to trust the professionals with your clean up procedure. Flooding, excessive rains, and sewer backups can all cause biological contaminants to enter your home. A team of mold clean up specialists in the Bay Area will have access to the protective equipment and tools that are needed to safely eliminate biohazards from your home. By contacting your restoration specialists right away, you can limit the damage that is caused to your property.

    In the event that your home is exposed to biological contaminants, there are a few steps that you will want to take. First, you should evacuate your family from your household. Once you are safely away from the biohazard, you can contact a team of remediation specialists for assistance. Your mold removal specialist will work diligently to make sure that every trace of the biological contaminants has been removed. Once your cleanup is complete, you can resume your normal activities with complete peace of mind.

    Your Home Is Exposed to Biological Contaminants

  • What Are Biological Contaminants?

    Mold is a type of biological contaminant, and if you’ve been looking into your options for mold detection in the Bay Area , then you could benefit from knowing more about this and similar organisms. Continue reading to learn about biological contaminants.

    Looking at Biological Contaminants Biological Contaminants

    In your day-to-day life, you are exposed to a wide range of living organisms that you are unable to see. These organisms, such as fungi, viruses, bacteria, and parasites, are classified as biological toxins if they can be hazardous to the health of animals or people when they are swallowed, inhaled, or absorbed into the body in some other way. Some of these contaminants are large and visible to the naked eye, while others can only be seen under a microscope.

    Understanding the Dangers of Biological Contaminants

    Biological contaminants can affect people in many ways. Bacteria, for example, are nearly everywhere and can survive extreme environments. While some of these organisms are beneficial to our health, others are highly contagious and can be hazardous and even fatal. For this reason, anyone infected with bacteria that are common causes of foodborne illness, such as shigella, salmonella, or E. coli, must never work in food service. Molds, which belong to the kingdom of fungi, can also be a cause of foodborne illness when they grow on or otherwise contaminate food before it is eaten. Because of this, spoiled and moldy foods should be thrown away. Also, mold spores can cause a person to feel sick or have an allergic reaction when they are inhaled.

    Protecting Yourself from Biological Contaminants

    There are several steps that you can take to protect yourself and your family from biological contaminants. First, always remember to cook meats to the proper temperature and never prepare foods like fresh vegetables on a cutting board that you first used for meat or seafood. Also, if you notice mold on your walls or others signs of fungi growing in your home, then contact a mold removal specialist about services for mold detection and removal.

  • Tips for Choosing a Mold Removal Specialist

    If you need mold clean up near San Francisco, it’s vital to select a company that will utilize the proper abatement procedures and is experienced in mold removal. To find a company that will treat your mold-affected property thoroughly and effectively, use the following tips:

    Ask around for advice. Mold Removal

    Recommendations from people you know are some of the best ways to find reputable companies. Talk with friends, family, and neighbors to learn if they have required mold removal in the past, what company they hired, and if the process was successful and handled professionally. Additionally, do a bit of research online to find which contractors offer free estimates, have been in the business for a while, and have the highest and best reviews from previous clients.

    Find out what they know about mold.

    Your mold removal specialist should have the understanding that mold is more than just a nuisance, and that it’s also a health hazard that should be treated accordingly. This is because when handled improperly, mold remediation can cause you more trouble than good and lead to health problems for you and your family. Also, your contractor should be prepared to offer you advice about preventing future mold problems for your home.

    Ask about the specialist’s containment process.

    Proper containment is critical when it comes to dealing with mold. To prevent cross-contamination, the contractor should use negative air machines and plastic sheeting to contain the treatment area. Ask potential contractors if they comply with containment guidelines, if the employees wear proper safety gear and receive thorough training, and how they dispose of the waste afterward.

    Learn if they are licensed and insured.

    Unfortunately, some mold abatement companies provide services without any insurance coverage. While this may allow them to offer you lowered costs, it puts you at risk for higher expenses if something goes wrong. The mold removal specialist should also meet all of the regulatory standards and licensing for your area, such as holding a Contractor’s License, a Hazardous Materials Certificate, and a Hazardous Waste Transporter Registration.

  • The Process of Cleaning Up Mold

    If you have discovered mold in your house, it’s important to seek professional mold remediation in San Francisco as soon as possible. You should not put off mold remediation, or attempt to perform mold removal yourself, as exposure to black mold can be very detrimental to your health. Here is a look at how professionals perform mold inspections, mold testing, and mold removal.

    Mold Inspection and Mold Testing Cleaning Up Mold
    If you have a water leak or water damage in your home, it’s possible that you also have mold growth. You can contact an expert in mold remediation for a thorough mold inspection of your home. Your mold remediation expert will search throughout your home for evidence of mold growth, particularly in areas that are damp, humid, and warm. Mold can grow in behind tiles and wallpaper, inside of walls, around plumbing fixtures, and behind furniture or appliances. If your mold remediation expert discovers mold in your house, he will perform mold testing to determine the species of mold present.

    Mold Removal
    Once your mold remediation expert knows what type of mold he is dealing with, he can begin the mold removal process. He will use specialty equipment and cleaners to ensure that the mold spores are contained, and that all traces of mold are completely removed. He will wear protective clothing to limit exposure to black mold, and will completely remove and dispose of any textiles, furniture, or other items that have been contaminated beyond repair.

    Mold Remediation and Mold Prevention
    If possible, your mold remediation expert will clean and save any belongings that have been exposed to or contaminated by black mold. Some items may not be salvageable, and you might need construction services to rebuild structures that were completely contaminated. This might include carpeting, flooring, insulation, textiles, wooden structures, furniture, and plumbing fixtures. After mold removal, your mold remediation expert will talk to you about mold prevention techniques. This will help you prevent the growth of mold in your house in the future.

  • A Closer Look at Mold Remediation

    After a mold remediation professional performs complete mold removal in San Francisco , he should talk to you about how to prevent mold in your house in the future. Mold prevention techniques are an important step in mold remediation, and will ensure that the health and safety of your home and family is protected. Because mold thrives in damp, humid, warm environments, mold growth often occurs when a home has water leaks or water damage.

    Watch this video to find out how installing a sump pump can prevent the growth of mold in your house. A sump pump will pump water up and out of your basement or crawlspace, thus preventing water damage and mold growth. After you install a sump pump, you won’t have to worry about paying for mold inspections, mold testing, mold removal, and mold remediation services.

  • How to Tell When You Have a Household Mold Problem

    The easiest way to tell that you have a mold problem in your home is to physically see mold growing somewhere in your house. Often times, mold will grow underneath of a sink or around a leaky pipe, and you will be able to tell that you need to have mold removal done. There are some other signs that will also indicate the possibility of mold in your home, just in case you can’t actually see it. You should have a mold inspection near San Francisco completed if you ever sense any of these signs.

    You smell mold in your home. Mold Room Wall
    While you probably won’t be able to smell mold if it is contained to a small section of your home, you will likely be able to smell it once it begins to spread. Mold has a very distinct odor, so you shouldn’t have too much trouble smelling it if it’s somewhere inside of your home. As soon as you do, you should have a mold removal specialist come out and inspect your home for the presence of mold.

    You notice that you have a water leak somewhere in your home.
    There are some water leaks that are easy to spot. For example, you may have a leaky pipe underneath of your bathroom sink. However, there are other leaks that take place behind walls and above ceilings that you might not be able to see. If you see water spots forming, you likely have a leak, and where there’s water, there’s usually some mold present as well. You will need to bring in a plumber to fix the leak and a mold remediation company to remove any mold located near it.

    You experience allergic reactions in your home on a regular basis.
    Do you have watery eyes all the time, or is there someone in your family who can’t seem to stop coughing? It could be a result of normal allergies, but it could also be a side effect of mold exposure. Visit a doctor to see if mold could be the culprit for your health issues.

  • Steps to Take Before Beginning Abatement

    Whether you’re dealing with lead, mold, or asbestos, a professional environmental services company can make sure that your home is safe by getting rid of these harmful substances through an abatement process. However, there are a few steps you need to take before the professionals can come in and remove asbestos, mold, or lead from your home.

    • Remove personal belongings and appliances from the area(s) of your home in which abatement will be occurring
    • Curtain rods and other fixtures that are attached to walls and ceilings should be removed to allow for containment during abatement
    • Turn off HVAC equipment
    • Additional preparation may be requested

    Depending on the size and scope of the abatement project, you may also need to make arrangements to stay with friends or family while your home is rid of mold, lead, or asbestos. An abatement company in the Bay Area will inform you of how long the process should take and whether or not you’ll be allowed to stay in your home during the removal.

    Safety During Asbestos Abatement

  • Cleaning Black Mold

    If you notice black mold in your home, it is highly important to clear up the issue right away. Since mold can create serious health problems for yourself and your family, you should be sure to trust your mold removal to a professional company specializing in black mold near the Bay Area. For minor mold symptoms, you can use a combination of baking soda and vinegar to remove the mold completely. For more significant mold damage, however, you will need to hire a professional abatement company for repairs. To take a look at some of the basic steps of cleaning black mold throughout your home, be sure to check out this informative video from essortment.

  • A Look at Different Types of Basement Waterproofing

    If you are concerned about mold in your home , you may want to take the steps needed to prevent this toxic substance from forming in the first place. Since mold requires moisture in order to grow and spread, you can help to prevent mold by waterproofing vulnerable areas of your house. For example, a basement can be particularly susceptible to developing mold symptoms. Fortunately, a company specializing in black mold near the Bay Area can help you take all of the steps needed to rid your home of mold permanently. To highlight some of the top mold prevention solutions, here is a look at the different types of basement waterproofing.

    Concrete Waterproof Coating
    One of the top options for basement waterproofing is the application of a concrete waterproof coating to all of your basement walls. Once the concrete waterproofing substance has been placed, your basement will be completely Bay Area Basement Waterproofing resistant to moisture and water. A contractor will apply the concrete waterproofing coating using a specialized brush. After the concrete coating has been applied, your basement will be permanently waterproof.

    Acrylic Waterproof Paint
    Another option for basement waterproofing is to apply a coat of acrylic waterproof paint. This type of paint is similar in consistency to ordinary wall paint, and can be used to waterproof a variety of different surfaces. Once the acrylic paint has dried, it will repel moisture away from your basement. To achieve the best results with waterproof paint, the paint must be applied in a very thick coating.

    Penetrating Silicate Sealers
    If you are seeking a highly durable option for your basement waterproofing, you may want to consider applying a penetrating silicate sealer. Unlike other types of waterproof coatings or paints, this waterproofing option will soak into the walls of your basement. The silicate compounds in the sealer will then react with the concrete, creating a completely waterproof barrier. Penetrating silicate sealers are only suitable for use on concrete that has not been previously painted or treated with any other products.

  • Tips for Locating Water Damage

    Whether your home has been affected by sudden flooding or a plumbing problem, water damage can cause lingering issues for your property. When water damage is left to sit for too long, mold and mildew can begin to form. Since black mold exposure can lead to significant health issues for you and your family, you should be sure to contact a company specializing in mold serving the Bay Area . With the help of mold abatement specialists, you will be able to rest assured that all of the problems that are associated with water damage have been eliminated from your house. Read on for some helpful tips for locating water damage. Tips for Locating Water Damage in the Bay Area

    Visible Water Stains
    Visible water stains are among the most common signs of water damage in a home. When water is left to sit on the surface of a wall or ceiling, it can create a yellow or brown stain. While a water stain can indicate that there is a water damage issue, only a professional remediation company will be able to pinpoint the source of the damage.

    Buckling Surfaces
    When you are checking your home for signs of water damage, you may also want to look for buckling surfaces along your flooring and walls. Since water causes materials to expand, flooring will begin to swell as it absorbs water. Once the water has dried, the flooring will shrink back into place. Instead of lying flat, the damaged areas will have a rough and buckled appearance.

    Unusual Smells
    To locate water damage within your home, you may also want to use your nose. When water damage has created a mold problem on your property, you may be able to detect a musty or stale aroma. Checking for unusual smells can also help you locate mold and water damage that are hidden behind the surface of a wall. In the event that you detect water damage in your home, you should be sure to contact an experienced abatement company right away.